JUAL PIPA API 5L Grade B X56
PRODUCT SPESIFICATION :
The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
Sizes (Seamless): 1/2″ NB – 60″ NB
Sizes (ERW): 1/2″ NB – 24″ NB
Sizes (SAW): 16″ NB – 100″ NB
Wall Thickness available:
Schedule 20 – Schedule XXS (heavier on request) up to 250 mm thk.
|High Temperature Seamless Pipe||ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B|
|Heat Exchanger Seamless Tube||ASTM A179|
|Low Temperature Seamless Pipe||ASTM A333 Gr. 3/6|
|Low Temperature Seamless Tube||ASTM A334 Gr. 6|
|High Yield Seamless Pipe||API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80 PSL-1/PSL-2|
|High Yield Seamless Pipe||ISO 3183 Gr.L245, L290, L320, L360, L390, L415, L450, L485|
|Atmospheric & Low Temp EFW Pipes||ASTM A671 Gr. CC60/CC65/CC70|
|High Pressure & Moderate Temp EFW Pipes||ASTM A672 Gr. B60/B65/B70/C55/C60/C65/C70|
|High Yield ERW/SAW Pipe||API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80 PSL-1/PSL-2|
|High Yield ERW/SAW Pipe||ISO 3183 Gr.L245, L290, L320, L360, L390, L415, L450, L485|
Additional Testing :
NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc.
All Pipe is manufactured and inspected/tested to the relevant standards including ASTM, ASME, API.
The composition of pipe furnished to this specification, as determined by heat analysis for pipe other than Grade X 80, shall conform to the chemical requirements specified in Table 2, except that by agreement between the purchaser and the manufacturer carbon contents higher than those specified may be used. the composition of intermediate grades(higher than X42)shall conform to chenical requirements agreed upon between the manufacturer and the purchaser, and such requirements shall be consistent with the requirements specified in Table 2 for the applicable type of pipe For Grades X42 and higher, by agreement between the purchaser and the manufacturer, element other than columbium, vanadium, and titanium may be used; however, caution should be exercised in determining the quantity that may be present for any particular size and thickness of pipe because the addition of such otherwise desirable elements may alter the weldability of the pipe.