JUAL RING JOINT GASKET
PRODUCT SPESIFICATION :
R- SERIES GASKET :
R-Type ring gasket can be ordered in two different profiels, oval or octagonal in cross-section. Both types have identical pitch diameter as the flange groove they corespond to. These gaskets are used in pressure up to 5.000 PSI. The oval type is the only gasket that will fit a bottom radiused grooved. Flange with plat bottom v-grooves will accept either style
RX-SERIES GASKET :
RX gaskets are designed for pressure up to 5.000 PSI. They are interchangeable with R-oval or R-octagonal rings used on API 6B flanges. RX type gasket perform excellent in 6B flanged blowout preventer stack, requiring the additional mass of the RX gasket to support the higher pressure with higher vibrations and heavier weight of these units.
BX-SERIES GASKET :
The BX series can only be used with 6 BX flanges and 16 BX hubs. BX gasket are designed for higher-pressure ratings starting at 5.000 lbs. and ending with 20.000 lbs. pitch diameters on BX gaskets are slightly larger than the pitch diameter of flange. This forces the gasket to initially seal on its outside angles and secondly seal with its inside angles as the flange in bolted down to respective torque settings.
Product lainnya dapat dilihat di :
https://pipvalcon.co.id/home/product-category/accecories/gasket/