JUAL U BOLT HARGA MURAH DAN BERKUALITAS DI JAKARTA

Jual u bolt harga murah dan berkualitas di jakarta , segera hubungi sales kami di dan dapatkan penawaran harga terbaik dari kami. Supplier u bolt , distributor u bolt

SPESIFIKASI PRODUK :

These u-bolts are for suspension , leaf spring and body mounting primarily but have hundreads of other uses. We bend oue own u-bolts on a hydraulic bender cold so the grain of metal says oriented in the right direction for maximum strength. The stock rod may be bent in may shapes but the most common shopes are SQUARE TOP , SEMI-RPUND TOP and ROUND TOP. The only thread pitch we use are SAE (fine) and are manufactured by rolling a rod between dies creating threades for maximum strenth. This makes the non-threaded part of the stock slightly smaller in diameter than the diameter of the threades and are not thread-able beyond the way they are.

Small diameter U-bolts, especially round bend (1/2 dia and smaller) are more susceptible to measuring slightly wider due to the spring-like nature of the steel, but U-bolts, when properly torqued will conform to the shape of the item it is fitting over. If the item the U-bolt is fitting over is 3 inches wide, then the proper width U-bolt would be 3 inches wide. This product is not for ornamental use and is designed to be torqued. Please call with questions or concerns.

U-BOLT MATERIAL :

We do not stock any form of stainless steel material and do not offer any type of plating or galvanizing. All U-bolts are oil finish steel with SAE threads only.

CALCULATING U-BOLT SIZE : 

Note that the “L” measurement (length) is not exact depending on total rod length, consequently the “L” measurement may be slightly shorter or longer. We add “C” and “L x 2” measurements to get the total material length which is made in even lengths, 22, 28, 38 etc.

(Example: 4″ wide U-bolt with 5″ legs will be made out of a 14″ rod, resulting in an actual leg length of approximately 4 3/4″.)

CALCULATING APPROXIMATE THREAD LENGTH :

Approximate Thread Length is calculated by multiplying 2 X “L” plus “C” (which equals the overall length of rod material before bending)

Thread lengths are predetermined by our threaded rod manufacturer and are listed below;

(Total rod length = Thread length on each leg)

8″   to 20″ =  2″to 3″

22″ to 30″ =  Approx 4″

32″ to 48″ =  Approx 6″

PHYSICAL PROPERTIES :

150,000 PSI Minimum Tensile Strength; 130,000 PSI Minimum Yield Strength; 120,000 PSI Proof Load; 35% Reduction of Area; 10% Elongation. U-Bolts produced to SAE-J429 specification. This material is a cold drawn, stress relieved, micro-alloyed, 1541 modified steel. This steel cannot be welded on due to the orientation of the grain of the steel.

Product lainnya dapat dilihat di :

https://pipvalcon.co.id/home/product-category/accecories/bolt-and-nut/

 

---

U-bolts from 3/8 to 9/16 diameter are Grade 5, while 5/8 to 1 1/4 diameter are Grade 8.